Series 1 had 5 amazing sets but the most affordable one was the Snack Shack (910030), designed by Stefano Cornelissen (@distractedbuilder) coming in at just £39.99, the price point seemed spot on for most fans who wanted to experience the program and not break the bank, me included, plus it looks amazing!

Pre-orders we’re taken at the start of the yearand fulfilled at the end of June, from a manufacturing point of view that is quite fast, making the set, designing and producing the boxes, packaging it all up and finally sending them on their way. I built this live on my Instagram account of you’d like to watch that back click here. We stream every Thursday at 8pm (UK time).

The Box & Contents:

When it comes to the box, generally it’s the same, the material and feel are the same but the branding is different. Being a Bricklink Designer Program product the logo is where the LEGO one would be, LEGO do own Bricklink and their logo can be found on one of the edges, along with all the other gumph.

The all white packaging is rather refreshing, especially when most LEGO (18+) sets are darker colours. The logo, details and set images stand out well and show off the vital information. On the front is the set itself, the Air stream style shack, 2 Minifigures and set details. On the reverse is the set opened up, the back panel flips down to reveal the small but packed interior.

Just like standard LEGO sets the bags are numbered, here the set is divided into 4 bags. Also inside the box is a leaflet that has a quote from the original fan designer, a photo of the set and other details. On the reverse are QR codes, one directs you to the digital building instructions, as no physical paper copy is included, which I didn’t know so when it came to building live on Instagram I had to quickly find and download the required PDF. Since then I have published an article that links to each of the BDP Series 1 instructions.

The Build:

As always with LEGO, the base is constructed first. Making a start with bag 1, tan coloured plates are used to create the uneven sand effect, then darker tan plates are added followed by tiles for a decking area and grey for the base of the Airstream style shack. A bun, bucket, rat and some foliage are also applied here and make the set start to look more eye-pleasing and realise, it’s the small details that make it after all.

Bag 2 focuses on the interior of the Shack and an end wall. Creating the curves is a single yet nice technique to build, layering bricks and plates then covering them with certain sloped pieces. Taking a look at the furniture and appliances inside we have some very cool builds, including a fridge-freezer, sink, milkshake maker, toastie maker, and a deep fat frier. Each side build is great and has some nice part usage, the deep fat frier especially, it looks so good with the little handles and transparent orange pieces as the container.

Bag 3 is quite substantial, it comprises of the opposite and front walls plus the roof. Again using the same build techniques to create the curves, although the front needs 2 openings for the door and serving hatch. Clips have been left open for now, these will be for the door itself, an awning and a menu board. A tile above the serving hatch has been placed, this uses the first sticker that says ‘Snack Shack‘ one it.

Bag 4, the final bag, obviously completes the build by finishing off the walls with larger corner curved pieces, adding the wooden awning, door to the Airstream, a table for customers to stand at and a palm tree. The back panel has also been added and flaps down to allow access to the interior, albeit a little cramped for bigger fingers. I will say that one small gripe is the build quality of the door, it isn’t great and with only 1 or 2 points of contact panels tend to fall off if not careful.

The set really comes together once you add the extra details like the food and drink on the table and the Seagull, these little details are great and makes the thing look amazing. The only thing missing are the 2 Minifigures, which we’ll talk about below.

The Minifigures:

The 2 Minifigures are exclusive to the set, albeit in a unique combination way, as the torsos, legs and other parts have been in many other sets, mainly LEGO City.

Fiest up we have Dan the Food man, as named by our Instagram livestream viewers. He owns and runs the Snack Shack and is dressed for the part, in his dark blue cap and apron. He only has one face/expression, but what a cool face it is the design and print is stunning, he really fits the street food chef vibe.

Next we have hungry Hannah, also named by our viewers. She is a customer that sports a very nice torso design that looks cool and perfect for a stroll along the beach. At the end of the review are two scenes that I set up and photographed, these help give you a picture of what each character would get up to whilst at the Snack Shack.

Overall the BrickLink Designer Program Series 1 Snack Shack (910030) is a brilliant set, it’s small but it packs a mighty lunch, sorry I meant punch! From the iconic curves of the Airstream style shack to the decking area and Minifigures, the while thing looks amazing and I’m so glad I’m purchased this set. I have a space for it in my City (Gregsville), in the beach obv, serving the residents and tourists.

Do you have this set? Which other Bricklink Designer Program sets did you purchase? Let us know your thoughts and comments below, we love hearing from you!

Earlier in the year Series 1 sets became available to pre-order, today an update was issued to say they have started to process the sets ready to dispatch. It’s advised to login and check your shipping address and to change it if you have moved, also check your pay. Sent method too, just incase. The process to change details is easy, simply get in contact with LEGO. Cancelled orders, due to incorrect details, are very difficult to rectify, so it’s best to get in there early and check.

Some Series 2 sets are still available to pre-order, they close 30th June.

At the time of writing this post, two out of the five sets are still available to pre-order, with approximately 80% sold of the General Store (910031) and 55% of the Parisian Street (910032).

Those that have pre-ordered should know that Series 1 sets will begin production and shipping some time in July 2024, followed by Series 2 pre-orders starting 1st June.

https://www.bricklink.com/v3/designer-program/series-1/main.page

Still available:

Sold out:

You will be able to pre-order your favourite(s) from 7th February 2024, a recap of the sets on offer can be found below, along with their prices. The sets that receive over 3,000 pre-orders will be put into production with a total number of 30,000 units of each set. These should start shipping shortly after followed by a further two series of fan-created sets to pre-order.

In addition to the current regions, three other countries; Lithuania, Malaysia and Singapore, will also be able to pre-order and purchase these Bricklink Designer Program sets.

General Store by llucky:

£119.99 ($159.99 / €139.99)

Mountain Fortress by Sleepless Night:

£299.99 ($379.99 / €339.99)

Old Train Engine Shed by Mind_the_Brick:

£189.99 ($229.99 / €219.99)

Parisian Street by NicolasCarlier:

£259.99 ($319.99 / €289.99)

Snack Shack by Skeletuhr:

£39.99 ($49.99 / €44.99)

With five sets making it through to the crowdfunding stage, which begins February 2024, a total of 3,000 pre-orders will be produced. A further 20,000 sets will be manufactured during a very limited run, which should start shipping soon after the pre-order window.

In the mean time the search for Series 2 submissions will start next week, 15th May. 

Take a closer look at the finalists below. Click the link for more details and Series 2 information.

https://www.bricklink.com/v3/designer-program/series-1/main.page

General Store by llucky

Mountain Fortress by Sleepless Night

Old Train Engine Shed by Mind_the_Brick

Parisian Street by NicolasCarlier

Snack Shack by Skeletuhr

With over 370 designs to choose from there is certainly something for everyone, place yours votes is easy too via three emojis. Your feedback on these sets combined with the rules & guidelines set by the BrickLink Designer Program will ultimately create a list of just five sets, these will form Series 1 and be put forward for crowdfunding.

The fan voting stage runs until 31st March. There are far to many to list here so please head over to the official page and cast your votes.

If you’re unfamiliar with the BrickLink Designer Program please continue reading. Once submitted your idea will be put forward and voted upon by, LEGO enthusiasts. The first five sets to gain 3000 supporters will be put into production, each having 20,000 units made. 

The submission window is open until 28th February, crowd support will begin 7th March. Crowd funding will start sometime in 2024.

For more information and to submit your idea please visit the official website: BrickLink Designer Program Series 1.

Once submitted your idea will be considered and if one of the five picked will be put through to the crowd support stage, where LEGO enthusiasts show their interest.

The submission window is open now until 28th February, crowd support will begin 7th March. Crowd funding will start sometime in 2024.

For more information and you submit your idea please visit the official website: BrickLink Designer Program Series 1.

Series 1 will be very similar to last year’s Invitational period but with a few changes that support the new program and help it flourish. The main aspect remains untouched with the first 5 sets to reach 3,000 pre-orders will be chosen, with each set having up to 20,000 sets produced.

There is a countdown on the official Bricklink page that highlights when submissions will start. Check out the time line below of how the program is structured and what happens and when.

• Create your designs (December 9, 2022 — February 2023) – Design your models in Studio. Follow the Submission Guidelines.
• Open Submission (February 1 — 28, 2023) – Submit your models during a 4-week window to be considered before the deadline on February 28, 2023 at noon Pacific US time.
• Crowd Support (March 7 — March 31, 2023) – We invite all BrickLink members to vote for their favorite submissions. This crowd vote weighs in alongside the BDP’s internal selection criteria and influences the designs chosen for crowdfunding.
• Review (April — May 2023) – Our team checks every design for building experience, brand fit, and crowd favorites.
• 5 Designs Announced (Late May 2023) – We’ll reveal the five Series 1 designs. Then we’ll collaborate with fan designers to prepare them for production.
• Crowdfunding (February 2024) – BrickLink members may pre-order their favorite sets, with a limit of 2 of each set per household. All sets that receive over 3,000 pre-orders will be produced. Up to 20,000 of each set will be manufactured during a limited, one-time production run.
• Production and Shipping (Summer/Fall 2024) – We produce the sets in the factory. Orders will be ready to ship approximately 6 months after pre-ordering. Actual dates and shipping times may vary.

Important Information about BDP Series 1

• BDP Series 1 is accepting submissions between February 1 and February 28, 2023.
• All submissions must follow the Submission Guidelines and use only parts from the BDP Series 1 Palette.
• All are welcome to join our live webinar on December 14th at 8am Pacific / 5pm CET to learn about the Submission Guidelines. Can’t join live? We’ll make a video available after the session. You must register to attend at https://bit.ly/BDPS1-Webinar.

What calling it “Series 1” says about the Program’s future

We’re committed to helping you realize your ideas through the BrickLink Designer Program. By calling this iteration Series 1, we’re indicating the BrickLink Designer Program has matured from the one-off 2021 Invitational into a program we can sustain over time. With this and each future Series, we’ll issue a fresh brief and Submission Guidelines. This way, the program can evolve as we learn from experience during each series.