I’m Jake from Lets Build Lego and today I will be talking about my latest light kit installation. The light kit was purchased from Lelightgo a company I have used from the very start of my lego instagram account, I have found them to not only provide very reasonable priced light kits but also quick deliveries and fantastic customer service!. If you have yet to check them out be sure to, link can be found via Lets Build Lego profile or by checking out their Instagram @Lelightgo.

Now lets start talking about the Lego Delorean light kit! Lelightgo provide various version of the kit depending on your preference and budget, the versions available are as follows classic, classic remote, standard, standard remote and standard rc remote. The classic version consists of 5 bags. In those 5 bags you will have the white headlights, the blue lights that go round the rear wing of the car, across the roof and down the rear side of the other end, 1 white interior light, tail lights red and orange,  blue front bumper and 1 white rear licene plate light. Once turnt on the whole car will light up all at once!. If you was to purchase the classic version with the remote you’ll get the same lights but will be able to have additional fun by having either sections of the lights turn on or 1 light at a time turn on in sequence or have the lights flashing for fun effects.

The standard version has all the same lights as the classic plus more! With the standard you’ll be able to light up your wheels with a cool white light aswell as additional white lights in the rear sections from where the smoke would blow out. Standard version will consist of 7bags. Remote control will work the same as it does with the classic version.

Don’t forget you can also grab a sound kit to go with the standard version for that extra special effects. Each light kit comes with a AAA battery pack which will require 3 AAA batteries and a USB power cable to connect to the battery pack. The USB can also be plugged into a USB plug socket.

The lights are fairly simple to install based on my experience although some sets can be a little tricky, getting Into awkward sections but all the instructions can be found on www.Lelightgo.com click the menu and select user guide and just locate the light kit base on the set number.

I do have a video on my instagram of the standard lights installed, I will be posting close up photos aswell so be sure to check them out.

Prices of the versions are as follows:

• Classic – £35.99
• Classic remote – £46.99
• Standard – £69.99
• Standard remote – £79.99
• Standard Rc sound – £103.99

Discount codes for Lelightgo can be used from the following instagram accounts, their codes will give you 20% off.

• LetsBuildLego20
• BrickBeat20
• TheBrickPost20

Thank you for the taking the time to read my blog!

Your friend
Jake – Lets Build Lego

If you’re an avid reader of ours then you most likely know we’ve already dabbled in light kits. The most recent one was lighting up the Infinity Gauntlet, which in our opinion is one set that really does need a light kit, the Infinity Stones look absolutely stunning when shining bright. Grab yours here.

I’ll run through the process very quickly followed by photos and videos on the finished product.

The box:

The box is small and stylish and lists everything you get inside, although the installation guide is digital and found on their website.

Open the outer cardboard box and you’ll find a nifty hard plastic storage box that not only looks smart but it also doubles up as a protective shell for all the delicate cables and LED lights.

Each of the silver bags inside is nymbered or lettered, making installation easy and seamless.

The instructions are incredibly well done and take you through the whole process bag-by-bag, it even lays out the contents for you to check against before starting. This makes installing the light kit even quicker, and I must say this was one of the quickest I’ve ever installed.

To quickly find the instructions you’re looking for on the their website, search the page for the LEGO set number, it’ll take you directly to it. Click the lick and download the PDF, and away you go!

The Installation:

As we mentioned earlier we decided to tackle the installation process live on our Instagram account (@thebrickpost), which went extremely well and as usual the chat was great fun. Make sure to follow us to see future live streams.

We had the instruction manual ready on a tablet screen to make it easier to follow and away we went.

Laying the cables and parts out is definitely the way to do it, it helps by showing you the different lengths of cable and allows you to connect the right ends to right LEDs.

Following the steps is also very easy with a handful of photos corresponding to each section showing you exactly where a particular goes. I don’t think the process could be or get any easier.

The first bag has you apply a handful of LED strips to the ground floor, along with a bulb placed in the lamp above the front door. This does require you to take small parts of the set apart but this is for the greater good and hides those pesky cables.

Attaching lights to the bunting along the front of the house was most likely the trickiest part as it involved wrapping the wire-string lights about the LEGO cord in just the right way to have it reach the end withoit too much excess. But the end result looks nice and you soon forget how fiddly it was.

Most of the LED strips have an adhesive side that you can put into certain places. Don’t worry the tape won’t ruin the LEGO Bricks as they can be adjusted, reapplied , and removed.

Another great addition to this LeLightGo LED Light Kit is the special connector parts that allow you to remove each of the floors and not be tied down by the cables. A copper connector is placed on the lower floor while a 1×2 connector brick is please directly above it on the upper floor, allowing them to touch and complete the circuit. A perfect solution for LEGO Modulars!

The remaining steps are pretty much the same and have you installing the cables and strips in similar places. The kitchen and basement area is unfortunately all wired together and thus can’t remove each floor, but the overall look of the lights is still stunning.

Lighting up the Wet Bandits Van and Kevin’s Tree House is also fairly straightforward and isn’t that taxing or fiddly. The Van does require a tab more dismantling than the house combined, but that’s ok, the end result means the cables are hidden and tucked out of sight.

These all connect in one central connector which is located behind the house and there out of sight, this down have a sticky back so could be hidden underneath the house itself, although this would considerably shorten the cables that run to the Van and Tree House.

Having the option to be either battery or mains powered it opens it up and can be used in a number of scenes and positions. We would recommend purchasing a USB hub and running your LeLightGo Light Kit collection from that.

The Final Result:

Here is the final product, the LEGO Ideas Home Alone (21330) set all lit up with a LeLightgo LED Light Kit!

The Conclusion:

I think you’ll agree this set needs to be lit up, and what better way to go about that with a LeLightGo LED Light Kit!

From start to finish the whole process was simple and straightforward and with the help of the instruction manual you couldn’t go wrong. This is definitely one of the easiest light kits I’ve ever installed.

The inclusion of the wireless connectors, which allows the removal of the floors, is amazing and a very welcomed addit3to the modular experience – I can finally take the house apart and not worry about pulling out or breaking cables, amazing.

Each room has an ample amount of light and shows off the contents well. Most cables are hidden which is good as nobody likes additional things in view when admiring their LEGO.

Overall LeLightGo has done an amazing job with this light kit and we highly recommend it!

Please help support us by clicking our affiliate links below, we would really appreciate it. We also have a discount code for you to use, enter thebrickpost20 during the checkout process and you’ll get 20% off your order, nice.

LeLightGo:

https://lelightgo.com/?sca_ref=1326002.HFJ9qBQEID

LeLightGo Home Alone Light Kit:

https://lelightgo.com/products/light-kit-for-ideas-home-alone?sca_ref=1326002.HFJ9qBQEID

Thank you for reading this review by The Brick Post, we really hope you enjoyed it. Please bookmark us for all your LEGO related news, reviews, and more. You can also follow us on social media and interact with our growing community!